Electric Fan Heater |1 – 2.8kW Indoor/Greenhouse Heating
Our Electric Fan Heater is a sturdy, compact and versatile solution to your heating / cooling needs. A fully stainless steel finish helps with eventual rusting and wear down of the parts. Made from highly durable, heat resistant plastic the shell and dials are sure to last the test of time and use. The device is primarily a heater and it can kick out a great amount of warmth via it’s 3 different settings at 1kW, 1.8kW and 2.8kW (with more settings via the thermostat) to let you control the heat as you would like! Very useful for greenhouses, indoor use (such as painting, to dry) and much more!
On the 2.8kW setting the heater has a running cost of 2.8kWh.
(The following instructions are to be used with a numbered chart included in the instructions booklet)
Select the desired operating mode on selector switches 1 and 2.
Depending on size or location of greenhouse, power setting of 1800W or 2800W are recommended for winter months. In Autumn or Spring 1000W should suffice.
1800W: Ideal for greenhouse of up to 3m x 4m
2800W: Ideal for greenhouse of up to 3m x 6m
For more even heat coverage, reduced or nullified cold spots and to reach low hanging or short-growing plants we would suggest leaving the fan setting on at all times when in use.
Then set the desired temperature on the thermostat.
In the summer months you can use the air circulation mode to achieve substantial cooling of the greenhouse area temperature. Select operating mode 2b for this and open all windows and doors in the greenhouse. The thermostat wheel becomes irrelevant in this mode. Keeping the warm summer air circulating in the greenhouse will promote pollination of your plants and regulate humidity also!
Standard 3 Pin UK Plug included
Hanging Chains included
Floor Mounts included
Do not cover. Please follow safety instructions included before usage.
Heater must be installed horizontally, any damaged units incurred from incorrect fitting cannot be refunded or replaced.