Industrial Gas Heater | 10kW, 15kW, 30kW & 50kW
The Elixir Gas Fan Heater is both portable and powerful. These heaters have been designed to heat medium-large spaces quickly and maintain a desired temperature. Built to last with ease of use in mind, our heaters are lightweight and come with a robust handle making them easy to transport.
10kW, 30kW & 50kW Gas Heater Models
Our 10kW, 30kW and 50kW gas heaters have sturdy steel chambers with fan cooling and an easy-to-navigate digital display and thermostat. The heaters have a thermally protected engine, keeping the housing of the heater cool to the touch – even when in use. They have built-in overheat protection meaning your heater will cut out if the interior gets too hot. Our 30kW and 50kW models have a matte black finish, while our smaller 10kW model has a glossy red exterior.
With a 10kW, 30kW or 50kW output, these industrial gas heaters pack some serious heat! Enough to make medium-large spaces much more comfortable, especially during the cooler winter months.
These heaters are equipped with an adjustable thermostat and a digital temperature display. The display shows the ambient temperature and target temperature. You can adjust the target temperature using the built-in thermostat to find your perfect climate. The heater will run to achieve and maintain your target temperature so there’s no risk of your space overheating and no need for you to adjust the temperature.
15kW Manual Gas Heater Model
The Elixir 15kW Manual Gas/Electric Fan Heater is also high power and portable. This model is capable of heating medium-large spaces quickly and is lightweight making it easy to transport.
The heater has a thermally protected engine keeping its glossy exterior shell cool to the touch. It also has overheat protection meaning it will cut out if the interior overheats.
With a 15kW output, this manual gas heater gives off a decent amount of heat. Enough to make medium-large sized spaces much more comfortable, especially during the cooler winter months.
This model provides the same service as our other models, however it does not come with a digital display with automatic temperature control. This heater needs to be manually switched on and off to reach and maintain your desired temperature.
Using our Gas Heater…
All our heaters are suitable to use outdoors or in indoor environments with good ventilation. Perfect for:
- Construction sites
- Workshops and more.
The heaters can be used in damp conditions, but are not waterproof. They are powered by a gas cylinder and the electronics and fan are powered by mains electric.
Electricity input: 220-240V~50Hz
Gas type: For use with LPG, propane or butane
Supplied with: Threaded regulator connector – see image (check compatibility with your gas source/cannister)
|15kW / 51,180btu
|Gas Supply Pressure
ALWAYS read the User’s Manual before use. Do not leave the heater unattended for long periods of time whilst it is running – user should always be present/in the vicinity. Ventilation of the room is necessary to prevent a deficiency in oxygen supply.