MMC Pro 5 Litre Mould/Algae Treatment | Patio & Hard Surface Cleaner

MMC Pro is biodegradable, PH-neutral, contains no bleach or acids and is fully HSE-approved. MMC-Pro is the easiest and most effective way to tackle and prevent algae and mould build up on all hard surfaces. Simply dilute and apply.

Dilution Rates:

The dilution rate varies depending on what you are treating. Rough surfaces will require a bit more mixture to treat than smooth surfaces. The table below shows application rates and dilution.

It is recommended to apply the mixture from Jan – May and Sep – Dec for best effect.

MMC-Pro is a dynamic combination of anti-viral/anti-bacterial disinfectant, fungicide/algaecide and detergent. It treats algae and mould within 2-4 days and small, diminishing residues will help protect against re-growth for up to 9 months after first application.

MMC-Pro is suitable for use on all exterior hard surfaces including:

BRICKWORK | MASONRY | ROOFING | DRIVEWAYS | ASPHALT | PAVING | TARMAC | FENCING | CAR PARKS
MONUMENTS | HEADSTONES | SLATE & STONE | CONCRETE | FIBREGLASS | PLASTIC & METAL SURFACES
TENNIS COURTS | GRAVEL | RENDERING | PAVEMENTS | PLAYGROUNDS | GLASS | PAINTWORK | DECKING

When using MMC-Pro for make sure that it is in contact with the stem structure and not just the outer foliage. Apply on dry surfaces and leave for 3-5 hours for the chemical to take hold and work.

Precautions

Minimise contact with plant life. Limited run-off or over-spray onto grass, soil or hardy plants will not normally cause damage, and where heavier run-off or over-spray has occurred, the area should simply be flooded with fresh water. Pets and unprotected persons should be kept off the treated surfaces until the product has first dried (typically 3-5 hours).