MMC Pro 5Lt Mould/Algae Killer Patio Hard Surface Cleaner Armillatox Alternative
MMC-Pro is biodegradable, PH-neutral, contains no bleach or acids and is fully HSE-approved. MMC-Pro is the easiest and most effective way to tackle and prevent algae and mould build up on all hard surfaces. Simply dilute and apply.
The dilution rate varies depending on what you are treating, rough surfaces will require a bit more mixture to treat compared to smooth surfaces. The table below shows application rates and dilution.
(MMC : Water)
|Usable Litres||Rough surfaces||Smooth surfaces|
|Normal / Heavy Growth||1 : 4||25 Litres||75 – 100 sqm||175+ sqm|
|Light Growth||1 : 9||50 Litres||150 – 200 sqm||350+ sqm|
It is recommended to apply the mixture from Jan – May and Sep – Dec for best effect
MMC-Pro is a dynamic combination of anti-viral/anti-bacterial disinfectant, fungicide/algaecide and detergent. It treats algae and mould within 2-4 days and small, diminishing residues will help protect against re-growth for up to 9 months after first application.
MMC-Pro is suitable for use on all exterior hard surfaces including:
BRICKWORK | MASONRY | ROOFING | DRIVEWAYS | ASPHALT | PAVING | TARMAC | FENCING | CAR PARKS
MONUMENTS | HEADSTONES | SLATE & STONE | CONCRETE | FIBREGLASS | PLASTIC & METAL SURFACES
TENNIS COURTS | GRAVEL | RENDERING | PAVEMENTS | PLAYGROUNDS | GLASS | PAINTWORK | DECKING
When using MMC-Pro for make sure that it is in contact with the stem structure and not just the outer foliage. Apply on dry surfaces and leave for 3-5 hours for the chemical to take hold and work.
Contact with plant life should be minimised. Limited run-off or over-spray onto grass, soil or hardy plants will not normally cause damage, and where heavier run-off or over-spray has occurred, the area should simply be flooded with fresh water. Pets and unprotected persons should be kept off the treated surfaces until the product has first dried (typically 3-5 hours).