TH0 Tube Heaters with Guards & Thermostats
Elixir’s TH0 Tube Heaters offer the ideal heating solution for situations that require safe, cost-effective, steady background heat.
Designed with safety in mind, tubular heaters are a versatile and economical heating method. Perfect as a steady heat source or frost protection as well as preventing condensation and moisture build-up on walls . They can be used in a variety of environments:
- Greenhouses, Garden Sheds & Conservatories
- Airing cupboards
- Basements
- Caravans
- Boats & Canal Barges
- Kennels & Pet Enclosures
- Out buildings & Toilets
- And much more…
They can also be used to supplement existing domestic or commercial heating systems, offering an efficient source of additional heat.
Our Tubes are not only designed to be a versatile unit but a powerful one. When running, the surface of these heaters are extremely hot. Therefore, it is always highly advisable to also purchase a Heater Guard to avoid items/people falling or resting on the unit.
All our tube heaters are IP44 rated and are available in sizes of 50 – 150cm.
Built to last
The tubes themselves are made from steel, powder coated in white and are designed to provide steady background heat as economically as possible. Tube heaters are fantastic for frost protection and preventing condensation, also.
TH0 Tube Heaters are typically designed to run at all times – however, due to their years of development, you can actually switch the Tube Heater on and off throughout the day without risk of damaging the element!
IP44 rated
To ensure our tube heaters will always be ideal we have worked hard to achieve an IP44 rating. Lights which are IP44 rated are designed for use in bathrooms and other environments where water is a risk of damage, meaning that they are protected against water splashing at
the enclosure from any direction.
Control the output of your heater
Our tubes are fitted with a low energy LED power switch with an indicator light for safe and simple switching between ON or OFF.
Model Number |
Power (W) |
Electrical Supply |
Adjustable Thermostat Range (°C) |
Product Length (mm) |
Product Net Weight (kg) |
Running Cost |
TH01 |
55W |
220-240V 50Hz |
0 – 85 °C |
505mm |
0.48kg (tube only) |
0.045kWh |
TH02 |
90W |
220-240V 50Hz |
0 – 85 °C |
705mm |
0.58kg (tube only) |
0.09kWh |
TH03 |
135W |
220-240V 50Hz |
0 – 85 °C |
1005mm |
0.76kg (tube only) |
0.135kWh |
TH04 |
190W |
220-240V 50Hz |
0 – 85 °C |
1505mm |
0.93kg (tube only) |
0.19kWh |
Heater must be installed horizontally, any damaged units incurred from incorrect fitting cannot be refunded or replaced.
Thermo-Guard Analogue Control Plug-in Thermostat TH-926T
Just plug into your socket, plug your appliance into the thermostat, set the required temperature and that’s it! The thermostat will stop and start your heater as the temperature rises and falls. Ideal for tube heaters, oil filled heaters, convection heaters and electric radiators.
Readings are not accurate when used with a fan heater
Approx size: 12cm long, 6cm wide, 4.5cm deep (not inc plug in prongs).
Indicator light to show when the appliance is on/off.
Maximum resistive load |
Maximum inductive load |
Operating temperature |
Temperature Control Range |
Precision |
13A 3120W |
9A 460W |
-10°c (14°f) ~ 70°c (158°f) |
5°c (40°f) ~ 30°c (85°f) |
±2°c |
Thermo-Guard Digital Control Plug-in Thermostat TH-928T
Just plug into your socket, plug your appliance into the thermostat, set the required temperature and that’s it! The thermostat will stop and start your heater as the temperature rises and falls. Ideal for tube heaters, oil filled heaters, convection heaters and electric radiators.
Readings are not accurate when used with a fan heater
Approximate size: 12cm long, 6cm wide, 4.5cm deep (not including plug in prongs).
Includes indicator light to show when the appliance is on/off.
Maximum resistive load |
Maximum inductive load |
Operating temperature |
Temperature Control Range |
Precision |
13A 3120W |
9A 460W |
-10°c (14°f) ~ 70°c (158°f) |
5°c (40°f) ~ 30°c (85°f) |
±1°c |
Tubular Heater / Electric Tube Guard | 1ft, 2ft, 3ft & 4ft
All our tubular heater guards are made from powder coated steel and are designed with safety in mind. Offering protection against the tubular heaters hot surface, they are ideal for use in environments in where the very young or elderly are likely to be left unsupervised or where pets have access.
Comes with screws to attach tube heater guard into position.
We supply guards in various sizes from 1ft – 4ft to supplement our range of tube heaters.
Guard |
Width cm/in |
Length cm/in |
Height cm/in |
1ft |
16.0 / 6.3 |
30.6 / 12.0 |
10.5 / 4.1 |
2ft |
18.0 / 7.0 |
61.0 / 24.0 |
10.0 / 3.9 |
|
3ft |
17.0 / 6.7 |
90.5 / 35.6 |
10.0 / 3.9 |
4ft |
18.0 / 7.0 |
122.0 / 48.0 |
10.0 / 3.9 |
We also stock Tube Heaters with Digital Timers for heating consistently for precise periods of time. Find them
here.